当前位置: 东星资源网 > 优质范文 > 廉政谈话 > 正文

消弧线圈接地系统单相接地故障选线研究

时间:2020-11-24 14:02:59 来源:东星资源网

消弧线圈接地系统单相接地故障的选线研究中文摘要 中性点经消弧线圈接地系统发生单相接地时,地面和中性点之间串联了消弧线圈,所以产生的短路电流很小。此时三相电压仍然保持对称,所以整个体系保护的设备不会立马停止运行。按道理来讲,体系能够继续工作一到两小时,然而,不及时处理故障,可能会变成有两相或者是三相的电路都会出现短路的现象。所以,一旦故障出现,就要及时找出故障的问题线路并排除故障,才能保证系统运行的安全运行。所以,在故障的线路进行选择时要非常慎重才可以。

这篇文章刨析了对于连接地面时产生的一些故障时具备的特征以及暂态特征,并使用MATLAB搭建接地系统仿真模型并进行仿真验证。通过分析,论文以五个谐波作为一个故障的参考值,经过计算电流的浮动指数,获得了五次谐波故障选线判据。

关键词 消弧线圈接地系统 单相接地故障 故障选线 五次谐波 毕业设计说明书(论文)外文摘要 Title Research on single-phase-to-ground of arc suppression coil grounding system Abstract When single-phase-to-groung fault occurs in the grounding system via arc suppression coil, since the arc suppression coil is connected in series between the ground and the neutral point, so the short circuit current generated is very small. At this point, the three-phase voltage remains symmetric, so the protection device of the system will not immediately trip. In theory, the system could run for another hour or two. However, if the fault is not handled in time, it may develop into a two-phase or three-phase short circuit fault. Therefore, when the fault occurs, we must find out the fault line and troubleshoot the fault within a short time, in order to ensure the safety of system operation.. Therefore, the s...

== 试读已结束,如需继续阅读敬请充值会员 ==
本站文章均为原创投稿,仅供下载参考,付费用户可查看完整且有格式内容!
(费用标准:38元/月,98元/年,微信支付秒开通!)
升级为会员即可查阅全文 。如需要查阅全文,请 免费注册登录会员
标签: 接地 单相 弧线 故障 研究
《消弧线圈接地系统单相接地故障选线研究.doc》
将本文的Word文档下载到电脑,方便收藏和打印
推荐度:

文档为doc格式

关于我们 | 网站地图 | 版权声明 | 联系我们 |

Copyright @ 2006 - 2024 dxf5.com All Rights Reserved

东星资源网 版权所有 友链、商务、投稿、客服、撤稿、投诉:QQ:179266880 邮箱:cptoo@163.com
《中华人民共和国电信与信息服务业务》 工业和信息化部 湘ICP备14009742号-43